Created on April 18, 2022 By

amcat

Am-Cat Restoration Finish Carpentry Certification

Finish carpenters trades may hone their skills in a wide range of techniques, all finish carpenters are Am-Cat certified.

1 / 23

Q. What are the two types of carpentry?

A. Rough: Here, the carpenter focuses on the “rough” framing of a building - that is, the walls, rafters, floors, posts, beams, and roof.

B. Repair: cover destruction and damage to a residence's interior and exterior, the loss or theft of possessions, and personal liability for harm to others. Three basic levels of coverage exist: actual cash value, replacement cost, and extended replacement cost/value.

C. Finish: With finish work, the carpenter focuses on flooring, staircases, moldings, trims, etc.

D. Replace: carpentry rebuild your home to how it was before a catastrophic event.

E. B & C

F. A & B

G. A & D

H. A & C

I. B & D

2 / 23

Q. Can I become a carpenter at forty?

A. The job of a construction framer is to build the framing for a residential or commercial structure. As a framer, your duties are to read blueprints or architectural schematics and construct the building's framework according to the plans. You may also repair old woodwork on building frames.

B. Having, math skills, because carpenters use basic math skills to calculate accurate measurements when building structures, physical strength, communication, attention to detail, problem solving, dexterity, mechanical skills, and get real comfortable with measuring.

C. If you can do all of this tasks Roofing 80% Drywall 78% Brick Masonry 72% Painting 60% Rough Carpentry 51% Siding 32% Plumbing 15% Electric 14% Finish carpentry 12% / master carpenter HVAC 8% Other 12% * includes concrete, tile, landscaping, demolition.

D. Being forty is not too old to be a carpenter. The biggest things they look for when hiring candidates are the attitude and enthusiasm toward the job. They have the tendency to employ a forty-year-old than a teen. If you are reliable and work hard, you have the best chance of getting hired.

3 / 23

Q. What is a master carpenter?

A. Having, math skills, because carpenters use basic math skills to calculate accurate measurements when building structures, physical strength, communication, attention to detail, problem solving, dexterity, mechanical skills, and get real comfortable with measuring.

B. A master carpenter is an advanced woodworker who possesses the skills needed to perform any task related to carpentry. Some of these tasks include the cutting, shaping and installation of building materials. A master carpenter should be a master of their trade.

C. The job of a construction framer is to build the framing for a residential or commercial structure. As a framer, your duties are to read blueprints or architectural schematics and construct the building's framework according to the plans. You may also repair old woodwork on building frames.

D. Roofing 80% Drywall 78% Brick Masonry 72% Painting 60% Rough Carpentry 51% Siding 32% Plumbing 15% Electric 14% Finish carpentry 12% / master carpenter HVAC 8% Other 12% * includes concrete, tile, landscaping, demolition.

4 / 23

Q. What falls under rough carpentry?

A. Roofing 80% Drywall 78% Brick Masonry 72% Painting 60% Rough Carpentry 51% Siding 32% Plumbing 15% Electric 14% Finish carpentry 12% HVAC 8% Other 12% * * includes concrete, tile, landscaping, demolition.

B. Rough carpentry focuses on the framing of a building. This means the carpenters are responsible for the wood or metal support systems that make up a structure's walls, flooring, and roof. Think of the frame as the building's skeleton.

C. A block installed behind the crown molding at the junction of the ceiling and wall and nailed to the wall framing provides a solid nailing surface for crown molding.

D. Having, math skills, because carpenters use basic math skills to calculate accurate measurements when building structures, physical strength, communication, attention to detail, problem solving, dexterity, mechanical skills, and get real comfortable with measuring.

5 / 23

Q. Why is carpentry so hard?

A. Crown molding is a decorative finishing element that's normally used for capping cabinets, columns, and, most often, interior walls at the point where the wall meets the ceiling. It's only used at the top of a room, thus the term “crown” is used to describe the embellishment of a space.

B. Learning to be an Electrician is more difficult than learning to be a Plumber. A Plumber job, on the other hand, is more physically demanding. A Plumber earns less than an Electrician. An Electrician makes more money than a Plumber.

C. Carpentry can be hard heavy work as it often involves lots of lifting and serious manual labor, so yes becoming and staying a carpenter can be very hard. Carpentry can be hard heavy work as it often involves lots of lifting and serious manual labor, so yes becoming and staying a carpenter can be very hard.

D. The job of a construction framer is to build the framing for a residential or commercial structure. As a framer, your duties are to read blueprints or architectural schematics and construct the building's framework according to the plans. You may also repair old woodwork on building frames.

6 / 23

Q. What is the difference between a trim carpenter and a finish carpenter?

A. Also called “finish carpenters” because their work adds the final touches to new construction and remodeling projects, trim carpenters represent the upper end of the carpenter career ladder, both skill-wise and salary-wise.

B. The job of a construction framer is to build the framing for a residential or commercial structure. As a framer, your duties are to read blueprints or architectural schematics and construct the building's framework according to the plans. You may also repair old woodwork on building frames.

C. Having, math skills, because carpenters use basic math skills to calculate accurate measurements when building structures, physical strength, communication, attention to detail, problem solving, dexterity, mechanical skills, and get real comfortable with measuring.

D. Most experts recommend putting crown molding in the centralized rooms of the house (like the kitchen, living room, family room, and dining room), however, the bedroom is also a great place to utilize it. It's a great way to increase the sophistication of your bedroom's design without adding clutter.

7 / 23

Q. Do finish carpenters install cabinets?

A. The job of a construction framer is to build the framing for a residential or commercial structure. As a framer, your duties are to read blueprints or architectural schematics and construct the building's framework according to the plans. You may also repair old woodwork on building frames.

B. After you have nailed the crown molding to the ceiling, you may notice a gap between the ceiling and the crown moulding. You can minimize the appearance of the gap by simply squeezing in some silicone caulk between the moulding and the ceiling.

C. Here is a selection of duties that a finish carpenter might be responsible for on a job site: Building and installing cabinets, such as kitchen cabinets and under-stair cabinets. Install wainscoting, baseboards, door trim, and other final touches. Building and installing stair railings.

D. Crown molding is a decorative finishing element that's normally used for capping cabinets, columns, and, most often, interior walls at the point where the wall meets the ceiling. It's only used at the top of a room; thus, the term “crown” is used to describe the embellishment of a space.

8 / 23

Q. Does chair rail have to match baseboards?

A. One sculpted area is typically more compact and more detailed than the other end; the highest level of detail or sculpting goes on the bottom. The other part of the crown molding usually has one large curve or wave to it, and this end is the top.

B. After you have nailed the crown molding to the ceiling, you may notice a gap between the ceiling and the crown molding. You can minimize the appearance of the gap by simply squeezing in some silicone caulk between the molding and the ceiling.

C. Like many creative pursuits, interior design has guidelines, but no hard and fast rules. The typical trend is to match your chair rail and baseboard colors but playing with this trend the right way can also make a dramatic visual statement.

D. Most experts recommend putting crown molding in the centralized rooms of the house (like the kitchen, living room, family room, and dining room), however, the bedroom is also a great place to utilize it. It's a great way to increase the sophistication of your bedroom's design without adding clutter.

9 / 23

Q. What is standard height for chair rail?

A. It's true that the average chair rail height will be around 32 inches. However, they can be positioned anywhere from 24 to 72 inches from the floor, depending on the height of the walls and the proportions you're hoping to achieve.

B. It's true that the average chair rail height will be around 42 inches. However, they can be positioned anywhere from 34 to 82 inches from the floor, depending on the height of the walls and the proportions you're hoping to achieve.

C. It's true that the average chair rail height will be around 22 inches. However, they can be positioned anywhere from 14 to 62 inches from the floor, depending on the height of the walls and the proportions you're hoping to achieve.

D. It's true that the average chair rail height will be around 30 inches. However, they can be positioned anywhere from 22 to 70 inches from the floor, depending on the height of the walls and the proportions you're hoping to achieve.

10 / 23

Q. What kind of nails do you use for chair rail?

A. As for wood flooring fasteners, you'll use nails or staples. Staples are generally a cheaper choice of fastener, but 16-, 18-, or 20-gauge flooring nails or “cleats” are the choice of pros. They allow for wood flooring expansion and contraction, also providing great holding power.

B. Secure each piece with two 2-1/2-inch finishing nails in line with each other. When you're bringing two ends together in a miter joint, add extra wood glue at the joint, and complete the seam with two finishing nails into the studs. Use a nail set to recess the nail heads to achieve a smooth appearance.

C. The 16-Gauge Nailer is Versatile, carpenters use them for a wide variety of tasks including interior trim, baseboard, and crown. You can do stair risers with them, and they're a good option to nail down tongue and groove flooring like near a wall or in a closet where a flooring nailer won't work.

D. One sculpted area is typically more compact and more detailed than the other end; the highest level of detail or sculpting goes on the bottom. The other part of the crown molding usually has one large curve or wave to it, and this end is the top.

11 / 23

Q. Can you add coffered ceilings?

A. One sculpted area is typically more compact and more detailed than the other end; the highest level of detail or sculpting goes on the bottom. The other part of the crown molding usually has one large curve or wave to it, and this end is the top.

B. Add a touch of elegance and loads of dimension to your ceiling. By adding a coffered or box beam ceiling made of softwood lumber, you can make an often-overlooked area the focal point of your room.

C. Most experts recommend putting crown molding in the centralized rooms of the house (like the kitchen, living room, family room, and dining room), however, the bedroom is also a great place to utilize it. It's a great way to increase the sophistication of your bedroom's design without adding clutter.

D. A block installed behind the crown molding at the junction of the ceiling and wall and nailed to the wall framing provides a solid nailing surface for crown molding.

12 / 23

Q. How much does it cost to do a coffered ceiling?

A. A basic 150-square-foot build costs $3,750 on average. Expect to pay $25 per square foot depending on the material and design you choose. The square foot price includes labor and materials but does not cover extras, like trim, paint and finials.

B. Prices vary in every city and for each project, but homeowners typically spend $2 – $4 per square foot to install tray ceilings. In a new-construction home, you might spend $500 – $1,500 total per ceiling.

C. The average price is $1,325, or about $5.50 per square foot. Wainscoting can be as cheap as $1 per square foot if using MDF or plywood, or more than $40 per square foot if using an expensive solid wood.

D. To have a professional install crown molding, expect to pay between $4 and $15 per linear foot for materials and labor. A single room costs anywhere from $300 to $800, while a whole house installation costs between $3,200 and $12,000.

13 / 23

Q. Do carpenters do hardwood floors?

A. Clean job sites Installed siding, cabinets, roofing, windows, and doors.

B. In addition, as part of their job, carpenters saw, fit and assemble plywood, wallboard and many other materials. Within carpentry, floor layers install carpeting, hardwood flooring, decorative flooring, soft tiles and "linoleum type" products made of vinyl and rubber is the work of floor layers.

C. Having, math skills, because carpenters use basic math skills to calculate accurate measurements when building structures, physical strength, communication, attention to detail, problem solving, dexterity, mechanical skills, and get real comfortable with measuring.

D. A block installed behind the crown molding at the junction of the ceiling and wall and nailed to the wall framing provides a solid nailing surface for crown molding.

14 / 23

Q. Do finish carpenters install doors?

A. A block installed behind the crown molding at the junction of the ceiling and wall and nailed to the wall framing provides a solid nailing surface for crown molding.

B. The job of a construction framer is to build the framing for a residential or commercial structure. As a framer, your duties are to read blueprints or architectural schematics and construct the building's framework according to the plans. You may also repair old woodwork on building frames.

C. Finish carpentry encompasses all work done inside a house after framing, sheathing, wiring, plumbing, insulation, and drywall have been installed. This includes door and window installation and trim, fitting interior doors, wood and laminate flooring installation, wainscoting, crown molding and cabinet installation.

D. Step 1: set the First Panel, step 2: secure the wood panel. step 3: accommodate the wall outlets, step 4: install the second panel, step 5: add the panel up to a corner, step 6: out the corner panels, step 7: install the remaining panels, moulding, and wall plates.

15 / 23

Q. What does interior carpentry include?

A. Finish carpentry is a broad term encompassing every finished wooden surface inside a residential interior. This can include cabinets, doors, stairs, trim, flooring, windows, and many other items.

B. Crown is typically nailed up with a 2” finishing nail and a compressor and finishing gun. Outside corners are usually done with a brad nailer and 1” brad nails with glue. Studs are generally 3-1/2”, drywall a ½” and the crown molding a minimum of ½”; therefore 2” finishing nails are necessary.

C. After you have nailed the crown molding to the ceiling, you may notice a gap between the ceiling and the crown molding. You can minimize the appearance of the gap by simply squeezing in some silicone caulk between the moulding and the ceiling.

D. Most experts recommend putting crown molding in the centralized rooms of the house (like the kitchen, living room, family room, and dining room), however, the bedroom is also a great place to utilize it. It's a great way to increase the sophistication of your bedroom's design without adding clutter.

16 / 23

Q. What is the difference between a trim carpenter and a finish carpenter?

A. A block installed behind the crown molding at the junction of the ceiling and wall and nailed to the wall framing provides a solid nailing surface for crown molding.

B. The work of a finish carpenter shouldn't be confused with that of a trim carpenter, who typically works on moldings, door and window frames, baseboards, mantels and other such ornamental details and features. Don't mistake a finish carpenter for a cabinet maker, either. C. Most experts recommend putting crown molding in the

C. A combination of decorative boards or panels and moldings that extend partway up a wall's face, wainscoting is a centuries-old marriage of form and style.

D. The job of a construction framer is to build the framing for a residential or commercial structure. As a framer, your duties are to read blueprints or architectural schematics and construct the building's framework according to the plans. You may also repair old woodwork on building frames.

17 / 23

Q. How thick should wainscoting be?

A. The fastest and least expensive wainscot installation is the glue-and-nail method. You apply panel adhesive to hold the bead board in position and then nail it to the drywall with a fine finish nail or even a pneumatic pin nail.

B. A 5/8-inch-thick, 32-by-48-inch sheet with the contours of three raised panels pressed into the surface gets fastened to the wall above base molding and capped with a chair rail.

C. A combination of decorative boards or panels and moldings that extend partway up a wall's face, wainscoting is a centuries-old marriage of form and style.

D. Even in casual spaces, the crown should be a minimum of 4″ while formal spaces will need a crown of at least 9″. In some cases, you will want a full entablature (cornice + picture mold) that is up to 24″ in height

18 / 23

Q. What kind of molding do you use for wainscotting?

A. The fastest and least expensive wainscot installation is the glue-and-nail method. You apply panel adhesive to hold the bead board in position and then nail it to the drywall with a fine finish nail or even a pneumatic pin nail.

B. The job of a construction framer is to build the framing for a residential or commercial structure. As a framer, your duties are to read blueprints or architectural schematics and construct the building's framework according to the plans. You may also repair old woodwork on building frames.

C. The type of material used for wainscoting can be wood paneling, cope and stick panels, overlapping boards or applied moldings. Wainscoting can be as elegant and formal as a raised panel, or a simple as a flat panel with a chair rail. A chair rail is a horizontal molding attached to the wall above the wainscoting.

D. Crown molding can certainly be used to make ceilings look even higher. If you paint over the trim in the same color as the walls, the ceiling will seem to blend into the wall, and you won't notice the height as much. Thin trim can also make the ceiling line appear further away.

19 / 23

Q. Can carpenters do flooring?

A. Common jobs for carpenters include Fitting floors.

B. Carpenters construct, repair, and install building frameworks and structures made from wood and other materials. Work Environment. Carpenters work indoors and outdoors on many types of construction projects, from installing kitchen cabinets to building highways and bridges.

C. Having, math skills, because carpenters use basic math skills to calculate accurate measurements when building structures, physical strength, communication, attention to detail, problem solving, dexterity, mechanical skills, and get real comfortable with measuring.

D. Most experts recommend putting crown molding in the centralized rooms of the house (like the kitchen, living room, family room, and dining room), however, the bedroom is also a great place to utilize it. It's a great way to increase the sophistication of your bedroom's design without adding clutter.

20 / 23

Q. Are framers considered carpenters?

A. In building construction, a framer is a carpenter who assembles the major structural elements of a wood-framed building called the framing. Framers build walls out of studs, sills, and headers; build floors from joists and beams; and frame roofs using ridge poles and rafters.

B. Having, math skills, because carpenters use basic math skills to calculate accurate measurements when building structures, physical strength, communication, attention to detail, problem solving, dexterity, mechanical skills, and get real comfortable with measuring.

C. Framing carpenters build and repair structures made of wood or wood products. They typically begin work early in a project, constructing what becomes the framework for the rest of the building. Framing carpenters are part of the larger profession of carpentry, and are often simply referred to as carpenters.

D. Crown molding can certainly be used to make ceilings look even higher. If you paint over the trim in the same color as the walls, the ceiling will seem to blend into the wall, and you won't notice the height as much. Thin trim can also make the ceiling line appear further away.

21 / 23

Q. What goes on top of wainscoting?

A. Even in casual spaces, the crown should be a minimum of 4″ while formal spaces will need a crown of at least 9″. In some cases, you will want a full entablature (cornice + picture mold) that is up to 24″ in height

B. Apply construction adhesive to the back of the piece of trim and fit it to the wall, overlapping the top of the paneling. Use a nail gun or hammer and nail set to attach the chair-rail molding over top of the wainscoting.

C. Crown molding does not make a room look smaller — in most instances. Whether it does or doesn't depend largely upon how high your ceilings are and how wide the molding is. If the room is small and has normal or low ceilings, a 2- to 4-inch-width molding is appropriate.

D. One sculpted area is typically more compact and more detailed than the other end; the highest level of detail or sculpting goes on the bottom. The other part of the crown molding usually has one large curve or wave to it, and this end is the top.

22 / 23

Q. What is the purpose of wainscoting?

A. One sculpted area is typically more compact and more detailed than the other end; the highest level of detail or sculpting goes on the bottom. The other part of the crown molding usually has one large curve or wave to it, and this end is the top.

B. For centuries, builders and homeowners have installed wainscoting to protect their walls from chair or table damage, scuff marks from footwear, and other damaging elements.

C. Crown molding can certainly be used to make ceilings look even higher. If you paint over the trim in the same color as the walls, the ceiling will seem to blend into the wall, and you won't notice the height as much. Thin trim can also make the ceiling line appear further away.

D. Crown molding does not make a room look smaller — in most instances. Whether it does or doesn't depends largely upon how high your ceilings are and how wide the molding is. If the room is small and has normal or low ceilings, a 2- to 4-inch-width molding is appropriate.

23 / 23

Q. Is siding considered carpentry?

A. Yes, the carpenters union in America used the term carpenter for a catch-all position. Tasks performed by union carpenters include installing "... flooring, windows, doors, interior trim, cabinetry, solid surface, roofing, framing, and siding

B. Vinyl Siding: 60+ years (warranties last between 20-40 years), fiber Cement Siding: 50+ years, stucco Siding: 50-80 years, depending on how it is backed, metal Siding: Up to 40 years, wood Siding: 20-40 years.

C. Common types of wood siding include wood planks, boards or panels, and shingles. Wood clapboard lap siding is one of the oldest types of house siding, and you can see its beauty in many historic homes. The main drawbacks of wood siding are its high cost and relatively high maintenance needs.

D. Wood siding in overlapping horizontal rows or "courses" is called clapboard, weatherboard (British English), or bevel siding which is made with beveled boards, thin at the top edge and thick at the butt. In colonial North America, Eastern white pine was the most common material.