Am-Cats Team Roofing Licensed Vendors will install a Roofing system, that will cost per day and a truck that will dump old roofing debris for $2500-$4500 a day based on the number of laborers.

Am-Cats process of installing a flat roof system is performed by licensed roofers.  With the slope of a roof properly known as its pitch flat roofs have up to approximately 10° pitch. insulating a flat roof is probably the most popular method for commercial roofs but can be utilized for residential roofs also.

Every City and Township will have its codes and protocols, but all Licensed roofers are licensed by the state. After your Joist systems are secured and the sub-roof surface installed and leveled with its 10° slope Modified bitumen roofing shall have a design slope of not less than ¹/₄ unit vertical in 12 units horizontal (2-percent slope) for drainage.

Am-cat Team Roofing applies a strong adhesive to the foam board (acting as the roof’s insulation, the thickness of the insulation as different diameters from Residential to Commercial), after applying and installing the foam board insulation on the roof surface and securing it with washer head nails. Then the rubber waterproof membrane adheres to the surface of the foam board. Two or more layers of foam board are normally used in this application to achieve the needed R-value. A modified bitumen roof generally consists of two layers: a base sheet and a cap sheet. modified bitumen roofing is thicker, and its edges are sealed by heating with a torch – You’ll see a little runout of melted bitumen at the material seams. The base sheet is often self-adhered to the roofing substrate.